感器將通過金屬發動機蓋檢測電磁磁通場。為了找到*佳的安裝位置，只需將傳感器周圍的高壓磁源，直到你的轉速表顯示屏上顯示一個穩定的RPM讀數。 將其連接到ACT-3X面板/臺式轉速表顯示轉速。請參閱規格表為ACT-3X，其中包括：0?5VDC，4-20mA的，TTL脈沖輸出，2個報警繼電器，RS232，USB或以太網選項。
技術參數：
1-99,999 RPM的 1到12英寸[2.54 30.48 CM】從線圈/磁 3.3*24 V直流4 mA為放大器的輸入
輸出信號：
同供電，TTL兼容
工作溫度：
-65°到225°F [-54°到107℃]
標準電纜長度：
傳感器15英尺[4.572米]，功放：1.5英尺[0.457米]
重量：
傳感器：9.25盎司[262.2克]，功放：3.58盎司[101.6克]
The new GE200 HP is a non-contact electromagnetic inductive sensor designed for making RPM measurements on gasoline engines. The sensor will detect the high voltage flux field being induced from ignition coils or magnetos on 2 or 4 cycle gasoline engines. The GE200 HP must be connected to the Monarch amplifier module which provides input power and a TTL pulse output. The GE200 HP includes an integral 15 foot (5 m) cable that can be extended to 150 feet (50 m).
The GE200HP sensor can be mounted up to 12 inches (30 cm) away from the ignition coil or magneto. The sensor will detect the electromagnetic flux field through metal engine covers. To find the optimal mounting position, simply move the sensor around the high voltage flux source until the display on your tachometer indicates a steady RPM reading
